• BPNCS Don Grosh

    $270.00$300.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. Don Grosh guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with BPNCS Don Grosh Contact us first if you want to build a BPNCS for Left handed Don Grosh or any special single coil pickups  
  • BPNCS Fender Stratocaster

    $295.00$335.00
    Even - ALL three pickups same polarity is better - If you have RWRP Middle pickup - All ILITCH systems will operate by using a correct wiring diagram! Find your wiring diagram here The BPNCS is a low impedance air coil built in a replacement backplate. It removes the hum while preserving the true single coil pickup tone. Fender Stratocaster guitars with 1, 2 or 3 Strat style single coil pickups can be retrofitted with this BPNCS Contact us first if you want to build a BPNCS for LEFT handed Strat, SRV Strat or any special single coil pickups
  • BPNCS G&L

    $270.00$295.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. G&L guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with BPNCS G&L Contact us first if you want to build a BPNCS G&L for any special single coil pickups.
  • BPNCS James Tyler

    $270.00$285.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. James Tyler guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with this BPNCS  Contact us first if you want to build a BPNCS for Left handed James Tyler or any special single coil pickups
  • BPNCS Knuggs Severn

    $270.00$285.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. Knuggs Severn guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with BPNCS Knuggs Severn Contact us first if you want to build a BPNCS for Left handed Knuggs Severn or any special single coil pickups
  • BPNCS PRS 305

    $270.00$285.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. PRS 305 guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with BPNCS PRS 305 Contact us first if you want to build a BPNCS for Left handed PRS 305 or any special single coil pickups
  • BPNCS Reverend

    $270.00$300.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. Reverend guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with BPNCS Reverend Contact us first if you want to build a BPNCS for Left handed Reverend or any special single coil pickups
  • BPNCS SUHR

    $270.00$285.00
    Low impedance air coil built in the replacement backplate removes the hum while preserving the true single coil pickup tone tone. SUHR guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with BPNCS SUHR Contact us first if you want to build a BPNCS for Left handed SUHR or any special single coil pickups
  • BPNCS Tom Anderson

    $270.00$285.00
    The BPNCS is a low impedance air coil built in a replacement backplate and removes the hum while preserving the true single coil pickup tone. Tom Anderson guitars with 1, 2 or 3 strat style single coil pickups can be retrofitted with this BPNCS Contact us first if you want to build a BPNCS for Left handed Tom Anderson or any special single coil pickups
  • ILITCH GeTran design on Classic One Dyna Dist Overdrive

    This pedal is a gain factory for producing of countless tone variation of your unique guitar tone. The Classic One DDO is providing a moderate MAX 54dB of gain On the newest GeTran design ILITCH replace the silicon input transistor to a military grade Germanium transistor which sound more like an old tube amp or a bit better. The tone produced is full, warm, round and smooth. Also it reacts amazingly well to changes in volume from your guitar volume pot when placed first in the effects chain

  • CVNCS C

    $275.00$295.00

    ILITCH Cavity Noise Canceling System C for Les Paul Control Cavity Plate – Large Circle shape

    Les Paul style guitars that have a back control cavity and one or two single coil pickups can be retrofitted with a CVNCS C. The CVNCS C replaces the control cavity cover and has been designed to fit the original hole pattern, making the installation 100% non invasive. For P90 style of pickups which read between 7.0KΩ and 9KΩ resistance select CVNCS C HOT Contact us first if you want to build a CVNCS C for any special single coil pickups
  • ILITCH Cavity Noise Canceling System IN for Les Paul Junior Special Double Cutaway 

    Gibson LP Junior Special Double Cutaway guitars that have a specific shape back control cavity with 4 potentiometers 3 way toggle switch and one or two single coil pickups can be retrofitted with the CVNCS IN LP Jr SDC The CVNCS IN LP Jr SDC is for P90 style single coil pickups which read between 7.0 KΩ and 9 KΩ resistance Contact us first if you want to build a CVNCS IN LP Jr SDC for any special single coil pickups
  • ILITCH Cavity Noise Canceling System IN for Les Paul R6 modern 

    Vintage Gibson LP guitars that have a rhomboid back control cavity with 4 potentiometers and one or two single coil pickups can be retrofitted with the CVNCS IN LP R6 The CVNCS IN LP R6 is for one or two P90 style single coil pickups which read between 7.0KΩ and 9KΩ resistance Contact us first if you want to build a CVNCS IN LP R6 for any special single coil pickups
  • ILITCH Cavity Noise Canceling System IN for Les Paul Studio 60's Tribute

    Vintage Gibson LP guitars that have a rhomboid back control cavity with 4 potentiometers and one or two single coil pickups can be retrofitted with the CVNCS IN LP S60T The CVNCS IN LP S60T is for P90 style single coil pickups which read between 7.0KΩ and 9KΩ resistance Contact us first if you want to build a CVNCS IN LP S60T for any special single coil pickups
  • ILITCH Cavity Noise Canceling System IN for Les Paul Special Double Cutaway 

    Vintage Gibson LP guitars that have a rhomboid back control cavity with 4 potentiometers and one or two single coil pickups can be retrofitted with the CVNCS IN LP SDC The CVNCS IN LP SDC is for P90 style single coil pickups which read between 7.0KΩ and 9KΩ resistance Contact us first if you want to build a CVNCS IN LP SDC for any special single coil pickups
  • ILITCH Cavity Noise Canceling System IN for Les Paul SG guitar

    Gibson Les Paul SG guitars with back control cavity 4 potentiometers, switch, jack and two single coil pickups can be retrofitted with the CVNCS IN LP SG The CVNCS IN LP SG is for P90 style single coil pickups which read between 7.0KΩ and 9KΩ resistance Contact us first if you want to build a CVNCS IN LP SG for any special single coil pickups
  • ILITCH Cavity Noise Canceling System IN for VINTAGE Gibson Les Paul

    Real Vintage Les Paul guitar MUST measure about 365mm or 14.5" in circumference of its cavity! It has a rhomboid shape with 4 potentiometers and can be retrofitted with the CVNCS IN LP VNT The CVNCS IN LP VNT is for P90 style single coil pickups which read between 7.0KΩ and 9KΩ resistance Contact us first if you want to build a CVNCS IN LP VNT for any special single coil pickups.
  • CVNCS IN S for Strat

    $295.00$300.00
    The latest Strat hum canceling CVNCS IN S models are for permanent installation under the guitar pickguard. It is "pre-shaped to fit" inside of the guitar control cavity of Fender Stratocaster or any other similar style guitar with 1, 2 or 3 single coil pickups. CVNCS IN S #1 is about 12.1/8" / 308mm;   CVNCS IN S #2 is about 12.1/2" / 318mm;  in circumference. Please Note: #1 CVNCS IN S model will perfectly work on #2 measured cavity circumference! Contact us first to discuss or if you want to build a custom CVNCS IN S for any special single coil pickups or control cavity circumference.
  • CVNCS IN Split HB

    $280.00$290.00

    ILITCH Cavity Noise Canceling System IN split HB 

    Gibson LP guitars that have a rhombus back control cavity with 4 potentiometers and one or two HB pickups can be retrofitted with the CVNCS IN split HB Select VNT for side by side style HB pickups which read between 6.0KΩ and 8KΩ or STD for HB pickups 8-12 KΩ resistance Contact us first if you want to build a CVNCS IN split HB for any special HB pickups
  • CVNCS IN T for Tele

    $295.00$300.00
    The latest Tele hum canceling CVNCS IN T models are for permanent installation under the control cavity cover. It is "pre-shaped to fit" inside of the guitar control cavity of Fender Telecaster or any other similar style guitar with 1, 2 or 3 single coil pickups. CVNCS IN T Classic #1 is about 12.1/8" / 308mm;  in circumference. Contact us first to discuss or if you want to build a Custom CVNCS IN T for any special single coil pickups or control cavity circumference.
  • CVNCS JR

    $305.00$320.00

    ILITCH Cavity Noise Canceling System for Les Paul Junior Cavity cover plate – enlarged circle shape

    Les Paul Junior style guitars that have a back control cavity and one or two single coil pickups can be retrofitted with a CVNCS JR. The replacement CVNCS JR cover is designed to fit the original hole pattern, making the installation 100% non invasive. Contact us first if you want to build a CVNCS JR for any special single coil pickups
  • CVNCS R2

    $300.00$335.00

    ILITCH Cavity Noise Canceling System R2 for Les Paul guitar Control cavity plate – enlarged rhombus shape

    Les Paul style guitars that have a back control cavity and one or two single coil pickups can be retrofitted with a CVNCS R2. The CVNCS R2 replaces the control cavity cover and has been designed to fit the original hole pattern, making the installation 100% non invasive. For P90 style of pickups which read between 7.0KΩ and 9KΩ resistance - select CVNCS R2 HOT Contact us first if you want to build a CVNCS R2 for any special single coil pickups
  • ILITCH GeTran design on Deep Blues Dyna Dist Overdrive

    This pedal is a gain factory for producing of countless tone variation of your unique guitar tone. The Deep Blues DDO is providing a moderate MAX 48dB of gain On the newest GeTran design ILITCH replace the silicon input transistor to a military grade Germanium transistor which sound more like an old tube amp or a bit better. The tone produced is full, warm, round and smooth. Also it reacts amazingly well to changes in volume from your guitar volume pot when placed first in the effects chain

     
  • ILITCH GeTran design on Heavy Metal Dyna Dist Overdrive

    This pedal is a gain factory for producing of countless tone variation of your unique guitar tone. The Heavy metal DDO is providing a moderate MAX 60dB of gain On the newest GeTran design ILITCH replace the silicon input transistor to a military grade Germanium transistor which sound more like an old tube amp or a bit better. The tone produced is full, warm, round and smooth. Also it reacts amazingly well to changes in volume from your guitar volume pot when placed first in the effects chain

  • The IHB4 humbucking pickup series is based on unique design that reinforces the magnetic field of the HB pickup IHB4 pickup, is optionally capable to deliver 4 different pickup soundings depending on the magnets arrangement IHB4 is slightly under wound to provide a space for placement an additional middle magnet between the two pickup coils That makes the signal creating string area bigger and the IHB4 pickup delivers stronger and more dimensional guitar tone
  • The new IP90 single coil guitar pickup series is based on unique design and single coil pickup winding technique All IP90 pickup models are direct retrofit for guitars equipped with P90 style pickup and about 500 KOhms Volume/Tone potentiometers. The IP90 pickup itself are NOT hum canceling!
  • LCNCS in hollow body

    $290.00$335.00
    This LCNCS modifications are for permanent installation inside of a hollow or semi-hollow body guitar with 1, 2 or 3 single coil pickups LCNCS Regular has 21.5" / 546 mm in circumference; LCNCS Compact has 19.75" / 502 mm in circumference Contact us first if you want to build a LCNCS for any special single coil pickups or specific guitar shape
  • LCNCS in large cavity

    $270.00$295.00
    This LCNCS modifications are for permanent installation in the back control cavity of guitar with 1, 2 or 3 single coil pickups LCNCS Compact1 is about 19.0" / 482mm; LCNCS Compac2 is about 18.0" / 457mm in circumference Contact us first if you want to build a LCNCS for any special single coil pickups or control cavity circumference
  • LCNCS in hallow body - This page is under development!
  • LCNCS on solid body

    $290.00$335.00
    NOTE: A tiny channel (1/2"/12mm deep; 1/8"/3.2mm wide) need to be machined around the three pickups! This LCNCS modifications are for permanent installation under the pickguard of guitar with 1, 2 or 3 single coil pickups LCNCS Regular 21.5" / 546 mm in circumference LCNCS Compact 19.75" / 502 mm in circumference Contact us first if you want to build a LCNCS for any special single coil pickups or guitar pickguard shape
  • Low impedance air coil built in the Jazz Bass pickguard keeps the true single coil pickup tone of your JB without the hum. American Fender Jazz Bass guitars with 1, 2 or 3 JB style single coil pickups can be retrofitted with PGNCS JB Contact us first if you want to build a PGNCS JB on your own JB pickguard
  • A replacement 11 holes American Standard Fender Stratocaster pickguard 72s that contains a low impedance air coil built inside of the pickguard. The PGNCS S is connected to 1, 2 or 3 strat style single coil pickups to remove the hum while preserving the true single coil pickup tone.

    Contact us FIRST if you see:<<Out of stock>> result after you submit all table options choices or to build a PGNCS S on your own pickguard; or if you need a pickguard with different number of HOLES or HOLES PATTERN

  • PGNCS Tele

    $320.00
    Low impedance air coil built in on the replacement pickguard. It removes the hum while preserving the true single coil pickup tone. American Fender Telecaster guitar with 2 single coil pickups can be retrofitted with PGNCS T Contact us FIRST if you see:<<Out of stock>> result after you submit all table options choices or if you would like a 3 pickups Nashville Tele; or to build a PGNCS T on your own pickguard.
  • ILITCH GeTran design on Twin Drive Custom Dyna Dist Overdrive

    This pedal is a gain factory for producing of countless tone variation of your unique guitar tone. The Twin drive DDO is featuring two independent drive channels On the newest GeTran design ILITCH replace the silicon input transistor to a military grade Germanium transistor which sound more like an old tube amp or a bit better. The tone produced is full, warm, round and smooth. Also it reacts amazingly well to changes in volume from your guitar volume pot when placed first in the effects chain
Go to Top