CVNCS IN LP Jr SDC

CVNCS IN LP Jr SDC

$315.00

2 in stock

ILITCH Cavity Noise Canceling System IN for Les Paul Junior Special Double Cutaway 

Gibson LP Junior Special Double Cutaway guitars that have a specific shape back control cavity with 4 potentiometers 3 way toggle switch and one or two single coil pickups can be retrofitted with the CVNCS IN LP Jr SDC
The CVNCS IN LP Jr SDC is for P90 style single coil pickups which read between 7.0 KΩ and 9 KΩ resistance
Contact us first if you want to build a CVNCS IN LP Jr SDC for any special single coil pickups

2 in stock

Category:

Description

ILITCH Cavity Noise Canceling System IN for Les Paul Junior SDC guitars
Enjoy your play and tone without the hum

DESIGN:
The CVNCS IN LP Junior SDC is based on the guitar control cavity shape and dimensions
A low impedance pre-shaped air coil which is the most transparent device for hum canceling system is placed inside of the control cavity
A small adjusting PCB is provided for the CVNCS IN LP Jr SDC easy installation and fine tinning of the hum canceling
LEFTY CVNCS IN LP Jr SDC will require a different model. Please contact us to discuss it first and then you place your custom order with us
Geometry check of the CVNCS IN LP Jr SDC shape and dimensions – Print the PDF 100% scale. Cut outline and check the match

FEATURES:
Based on our US patent we have created the CVNCS IN LP Jr SDC for an easy installation
USA made magnet wire used for building of the system
Designed and manufactured in USA
Note: All single coil pickups MUST be same polarity same winding direction (No RWRP!)

User’s Manual CVNCS IN LP Jr SDC
Find your wiring diagram here

STRENGTH SELECTING:
1. Find out from the pickups brand and model spec the alnico rod magnets type and the DC resistance in KΩ.
2. You can measure the DC resistance of the pickups (using a digital multimeter at 20 KΩ range or automatic) in the following way:
= Plug in a normal guitar cable into the guitar output jack
= Put Volume Tone pots at their Max position
= Go to position 1 – Bridge pickup only
= Measure the DC resistance between Sleeve and Tip at the other side of the guitar cable Jack
= Do same for the other pickups and write down the readings
Then you select the CVNCS IN LP SDC STRENGTH you need
STD – Strength 10 – for Alnico polepiece pickups 6-8 KΩ resistance
POW – Strength 15 – for Alnico polepiece pickups 8-12 KΩ resistance/Steel screw poles pickups (NOT P90!) 7-9 KΩ resistance
HOT – Strength 20 – for Steel screw poles pickups P90 7-9 KΩ resistance

SOUND:


Audio MP3 files recorded with a close located Audix mic, AC 30 – all tube amplifier and LP Goldtop Guitar equipped with IP90 pickup on Bridge position and IP90 on Neck position

VIDEO:

CVNCS-IN-SDC; LP Special Double cutaway style. Inside cavity wall circumference about 14.5″ or 365mm
Click here to see image

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

© ALL RIGHTS RESERVED ILITCH ELECTRONICS 2018
Go to Top