PGNCS Strat

$320.00

Out of stock

A replacement 11 holes American Standard Fender Stratocaster pickguard 72s that contains a low impedance air coil built inside of the pickguard. The PGNCS S is connected to 1, 2 or 3 strat style single coil pickups to remove the hum while preserving the true single coil pickup tone.

Contact us FIRST if you see:<<Out of stock>> result after you submit all table options choices
or to build a PGNCS S on your own pickguard;
or if you need a pickguard with different number of HOLES or HOLES PATTERN

SKU: N/A Category:

Description

ILITCH PGNCS S for Strat style guitars
Enjoy your play and tone without the hum

STRENGTH SELECTING  

1. Base your selection on your pickups brand, model specifications, type of alnico rod magnets used and DC resistance in KΩ.
2. You can also measure the DC resistance of the pickups yourself (using a digital multimeter at 20 KΩ range or automatic) in the following way:
= Plug in a standard guitar cable into the guitar output jack
= Put Volume Tone pots at their Max position
= Go to position 1 – Bridge pickup only
= Measure the DC resistance between Sleeve and Tip at the other side of the guitar cable jack
= Do the same for the other pickups and record your readings

You can then select the correct PGNCS S strength
VNT – Strength 8 – for Alnico polepiece pickups 5-6.5 KΩ resistance
STD – Strength 10 – for Alnico polepiece pickups 6-8 KΩ resistance
POW – Strength 15 – for Alnico polepiece pickups 9-13 KΩ resistance/Steel screw poles pickups (NOT P90!) 7-9 KΩ resistance

SOUND:


Audio MP3 files recorded with a close located Audix mic, AC 30 – all tube amplifier and Fender Stratocaster guitar equipped with three Strat style single coil pickups. Pickup recorded – Bridge only

VIDEO:

Additional information

STRENGTH

VNT – for Alnico polepiece pickups 5.5-6.5 KOhm resistance, STD – for Alnico polepiece pickups 6-8 KOhm resistance

MODEL

11 HOLE SSS STANDARD STRAT

COLOR

W/B/W 3-Ply with outline bevel, B/W/B 3-Ply with outline bevel, P/B/P 3-Ply with outline bevel, MG/B/MG 3-Ply with outline bevel

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Go to Top