$280.00 – $290.00
Out of stock
ILITCH Cavity Noise Canceling System IN split HB
Gibson LP guitars that have a rhombus back control cavity with 4 potentiometers and one or two HB pickups can be retrofitted with the CVNCS IN split HB
Select VNT for side by side style HB pickups which read between 6.0KΩ and 8KΩ or STD for HB pickups 8-12 KΩ resistance
Contact us first if you want to build a CVNCS IN split HB for any special HB pickups
ILITCH Cavity Noise Canceling System IN Split HB for Les Paul guitars
Enjoy your play and tone without the hum
STRENGTH SELECTING:
1. Find out from the pickups brand and model spec the alnico rod magnets type and the DC resistance in KΩ.
2. You can measure the DC resistance of the pickups (using a digital multimeter at 20 KΩ range or automatic) in the following way:
= Plug in a normal guitar cable into the guitar output jack
= Put Volume Tone pots at their Max position
= Go to position 1 – Bridge pickup only
= Measure the DC resistance between Sleeve and Tip at the other side of the guitar cable Jack
= Do same for the other pickups and write down the readings
Then you select the CVNCS IN split HB STRENGTH you need
VNT – Strength 8 – for side by side HB pickups 6-8 KΩ resistance
STD – Strength 10 – for side by side HB pickups 8-12 KΩ resistance
SOUND:
Audio MP3 files recorded with a close located Audix mic, AC 30 – all tube amplifier and Fender Stratocaster guitar equipped with three Strat style single coil pickups Pickup recorded – Bridge only
New MP3 recordings coming soon!
VIDEO:
| STRENGTH | VNT – Strength 8 – for side by side HB pickups 6-8 KΩ resistance, STD – Strength 10 – for side by side HB pickups 8-12 KΩ resistance |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.