|

|
 |
 |
 |
 |
 |
 |
 |
|
High End Guitar Pickups
Based on our continuous Engineering research and development in the guitar pickups field - introducing
our original Humbucking pickup designs for your guitar tone acceleration.
|
|
A new Humbucking Pickup design, incorporating an
Innovative Design, which delivers
tone variations never heard before.
Designed and tested in USA.
|
|
|
IHB4
Series - Description
|
The New
IHB4 Guitar pickup series are based on our unique, original design that
reinforces
the magnetic field of the HB pickup.
All IHB4 pickup models are direct retrofit for guitars equipped with HB pickup
and about 500 KOhms Volume/Tone potentiometers network.
IHB4 creates an amazing guitar tone within the size, geometry and look of
the traditional HB guitar pickup.
Basically, all IHB4 models are slightly under wound to provide a
space,
needed to accept an additional Middle Magnet (mm) located between the two
HB pickup coils.
Having that Middle magnet placed, makes the signal creating string area
bigger which in terms delivers stronger, heavier, and more 'dimensional'
guitar tone.
All IHB4mm models contain an Alnico 5/Alnico 2 Main magnet for regular magnetizing
of the pickup pole pieces and an additional middle magnet for expanding
the signal creating string area. In this way the IHB4mm pickup will
produce about 1.25 times stronger output, compared to the output of a
traditional HB pickup with same number of turns and having just the main
magnet loaded.
In addition the tone quality of the IHB4mm pickup is significantly
improved.
All IHB4msm models contain an Alnico 5 Main magnet for regular magnetizing
of the pickup pole pieces, an additional middle magnet for expanding the
signal creating string area AND a Bottom side magnet (bsm) for decreasing
of the magnetic strength of one of the coils pole pieces. In this way the
IHB4msm pickup will produce about 0.75 times output, compared to the output of a
traditional HB pickup with same number of turns and having just the main
magnet loaded.
In this way the IHB4msm pickup will sound more like a heavy single coil
pickup tonally close related to the famous P90 style pickups and with NO
Noise and no need to change the Volume/Tone control potentiometers
resistance value. Again the tone quality of the IHB4msm pickup is significantly
improved.
In general, every IHB4 pickup, is optionally capable to deliver at least 4
different soundings (without noise) depending on the permanent magnets
combinations. All 4 different soundings do not require changes of the
Volume/Tone potentiometers network.
To get an impression about the sound differences between the IHB4 models
please listen to the simple audio clips provided below.
|
|
IHB4 Humbucking pickup - MP3
samples Chart:
|
| Pickup |
Position |
Hear |
Wiring |
Main |
Add |
Add |
Ohm |
KHz |
EQ |
Signal |
| MODEL |
Bridge/
Neck |
Tone |
Out.
Cable |
Magnet |
mm |
bsm |
DC
Res. |
Res.
Freq. |
B/M/T |
Out.
Level |
| IHB4mmVintage |
Bridge |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
|
7K |
4.1 |
|
|
| IHB4mmVintage |
Neck |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
|
7K |
4.2 |
|
|
| IHB4mmPower |
Bridge |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
|
10K |
3.4 |
|
|
| IHB4mmPower |
Neck |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
|
10K |
3.3 |
|
|
| IHB4mmHot |
Bridge |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
|
14K |
3.0 |
|
|
| IHB4mmHot |
Neck |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
|
14K |
3.0 |
|
|
| IHB4msmVintage |
Bridge |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
Ceramic
bar bsm |
7K |
4.1 |
|
|
| IHB4msmVintage |
Neck |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
Ceramic
bar bsm |
7K |
4.2 |
|
|
| IHB4msmPower |
Bridge |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
Ceramic
bar bsm |
10K |
3.4 |
|
|
| IHB4msmPower |
Neck |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
Ceramic
bar bsm |
10K |
3.3 |
|
|
| IHB4msmHot |
Bridge |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
Ceramic
bar bsm |
14K |
3.0 |
|
|
| IHB4msmHot |
Neck |
Clean
Dirty |
4
Cond. |
Alnico
5 |
Ceramic
bar mm |
Ceramic
bar bsm |
14K |
3.0 |
|
|
|
|
The audio MP3 files were recorded with AC 30 - all tube amplifier,
Twin
Drive
Custom DDO and a close located Audix
mic.
|
|
Please, contact us
for product model availability and price/shipping arrangement terms.
|
|
|
Ilitch
Electronics LLC is a
PayPal Verified Member.
You
can go and check us at: https://www.paypal.com/us/verified/pal=sales%40ilitchelectronics.com
|
|
|
Ilitch
Electronics LLC
Camarillo, CA,
USA
Email:
ilitch@ilitchelectronics.com
|
Quick
Contacts:
ilitch@ilitchelectronics.com
sales@ilitchelectronics.com
service@ilitchelectronics.com
|
|
|
   
©
Ilitch Electronics LLC, 2010
|