Heavy Metal Dyna Dist Overdrive
The hottest Overdrive/Distortion pedal available. Creates supreme heavy metal tones from a Hot-burning Overdrive to a heavy saturated Distortion, easily sustaining into rich, harmonic feedback. 
Maximum Gain - 58dB.


     

100% heavy duty true bypass.
Bright LED indicator.
Strong, 1.6 mm, steel chassis.
Heavy-duty control pots.
External DC power jack.
Designed assembled and tested in USA.

 

 


Top view

      

 

TECHNICAL SPECS:
1. 100% True Bypass ON-OFF switching.
2. Bright LED indicator
3. 1/4" Input and Output female Jacks
4. 500K Ohm Input Impedance.
5. Less than 10K Ohm Output Impedance.      
6. Max. Gain - "DRIVE"@ Max:
    DYNA Mode (DYNA DIST @ MIN): >48 dB   
    DIST Mode (DYNA DIST @ MAX): >58 dB   
7. Unity gain noise: < -110 dBu*
8. Max Input level: >-3 dBu
9. Max Output Signal: >+3 dBu
10. DC Power supply: 
Battery or Regulated Adapter 9V +/- 1V
11. Current consumption @ 9V DC:
<4mA when "OFF" and <6mA when "ON".

*0 dBu = 0.775Vrmss

Front view

 
 
1/4" Female Input jack
DC Jack with "+" on RING
1/4" Female Output jack

CONTROLS:

DRIVE - Wide range gain control lets you adjust the overdrive and/or distortion level 
from very light to red hot overdrive and fully saturated harmonic distortion.
 
DYNA DIST - Mix control lets you adjust the amount of pure, smooth, tube-type overdrive
(full dynamic overdrive setting) with a more aggressive, hard edged, harmonically rich
fuzz distortion (full distortion setting) and all points in-between. Full DYNA position 
(counter-clockwise) lets more of the overdriven tone through, giving you a smooth, 
rounded dynamic, overdriven tube-like tone. Increasing the DIST level (rotating clockwise) 
increases the harmonic content for a thick, lush, harmonic filled distortion.
 
TONE - Passive, top end roll off control lets you clean up your tone when maxing out 
the gain (DRIVE) and harmonic response (DYNA DIST full DIST mode). 
At its max it has a wide band range so you don't lose any of your original tone. 
Decreasing will create more darker tones without getting muffled.
 
LEVEL - Smooth, logarithmic control lets you adjust the final output level 
(active when the Pedal is "ON"). 
 
All Analog Reliable Performance, selected quality components, and intelligent electronic design
gives you consistent performance from studio to stage independent of the size of your amplifier.
 
Heavy Metal Dyna Dist Overdrive User's Manuals:

To download as a .doc document  click here

To download as a .pdf document  click here


MP3 samples, Heavy Metal Dyna Dist Overdrive:

Sound files recorded with a close located Audix mic, AC 30 - all tube amplifier, Fender Strat guitar equipped with 
"Hot Rails" pickup @ Bridge position and Regular Single coil pickup @ Neck position.

Effect Controls locations Map:

1. LEVEL - @ Unity.
2. TONE - Max = Flat response
3. DYNA DIST
    Min - for
DYNA Mode
   
Max - for DIST Mode
4. DRIVE
    9:00 o'clock - for
Low Drive
   
3:00 o'clock - for High Drive

MP3 BRIDGE:

   
Effect OFF - Clean


Low Drive Dyna Mode


Low Drive Dist Mode


High Drive Dyna Mode


High Drive Dist Mode

MP3 NECK:

    

Effect OFF - Clean


Low Drive Dyna Mode


Low Drive Dist Mode


High Drive Dyna Mode


High Drive Dist Mode


ITEM STATUS: IN Stock

Unit Price: $250.00 US

Please go to Shopping for ordering information.


If you have decided to Buy Heavy Metal Dyna Dist Overdrive using the PayPal payment

Please go to our Shopping Center and read the instructions for  Method A payment.

Thank you for choosing the Ilitch Electronics LLC products!

Heavy Metal Dyna Dist Overdrive - Unit Price - $250.00 US

TAX:
Local sales tax is applicable for California State residents only.
California Residents:  
Please add 7.75% sales tax ($19.38 on top of $250.00 per pedal) with your PAYMENT per each purchased
unit.
i. e.: If you are California Resident you need to pay $269.38 for one pedal.

 

Ilitch Electronics LLC is a PayPal Verified Member.

You can go and check us at: https://www.paypal.com/us/verified/pal=sales%40ilitchelectronics.com


Official PayPal  Seal  

Ilitch Electronics LLC

Camarillo, CA, USA

Email: ilitch@ilitchelectronics.com

 

Quick Contacts:

ilitch@ilitchelectronics.com

sales@ilitchelectronics.com

service@ilitchelectronics.com

 



© Ilitch Electronics LLC, 2010